# How to Make a Resume in Word (2026): 32 Templates Tested

> How to make a resume in Word, after testing every Microsoft gallery template: 8 glue the candidate's name, sidebar tables scramble order. What to do instead.

Canonical: https://hiredfolio.com/blog/how-to-make-a-resume-on-word

Published 2026-11-07 · 11 min

Keywords: how to make a resume in word, resume in word, word resume template, microsoft word resume, create a resume in word

Every guide to making a resume in Word gives the same five steps. Open Word, type "resume" in the template search, pick one, replace the placeholder text, save as PDF. Then a paragraph about Calibri and one-inch margins. None of them opens a Word template to see what a piece of software reads in it.

So before writing the steps, we downloaded every resume template in Microsoft's own Word gallery, 32 files, and read each one with the .docx reader behind our resume import. What came out decides which templates to trust, and which Word habits to drop. The steps follow.

## What Microsoft's 32 resume templates look like once the words are extracted

On 4 October 2026 we downloaded the 32 resume templates listed on [Microsoft's Word resume template gallery](https://word.cloud.microsoft/create/en/resume-templates/), and the 25 on the French gallery for the French edition of this article. Each file went through the reader that our resume import and resume roast use for .docx uploads. It is the same reader we used in [our resume formatting test](/blog/resume-formatting). The placeholder text is Microsoft's, so what came out is what the template does to anybody's words.

### Eight templates glue the candidate's name together

This is the extracted text of "ATS simple classic resume", one of the templates Microsoft lists under its ATS filter:

> ChanchalSharma Office Manager (718) 555–0100 chanchals@example.com 4567 Main Street City, ST 98052

And this is the start of "Creative food service resume":

> VICTORIABURKE Manager Objective To secure a challengingand rewarding positionas a restaurant manager

The cause is one keystroke. The designer typed the first name, pressed Shift+Enter, and typed the last name on the next line. Shift+Enter inserts a manual line break inside the paragraph rather than a new paragraph, and our reader dropped that break without putting a space in its place. The two words became one. In the food service template the same keystroke sits inside the objective, which is how "challenging" and "and" fused.

In 10 of the 32 templates at least one pair of words came out glued. In 8 of them it was the candidate's name: "TaylorPhillips", "ItaiGerbi", "TonnieThomsen", "kristiLARR", and "ChanchalSharma" three times, in three templates built on the same sample profile. Two of the eight are templates Microsoft files under "ATS".

<div class="blog-stat">
  <div class="blog-stat-figure">
    <p class="blog-stat-number">8 of 32</p>
    <p class="blog-stat-sub">10 had at least one glued pair of words</p>
  </div>
  <div>
    <p class="blog-stat-text">Microsoft Word resume templates whose candidate name came out as one word when our .docx reader extracted the text, because first and last name are separated by Shift+Enter.</p>
    <p class="blog-stat-source">Source: HiredFolio test of Microsoft's 32 gallery templates, October 2026</p>
  </div>
</div>

This was the behaviour of our reader, measured in October 2026. We fixed it on 5 October 2026: run again, none of the 32 templates comes out with a glued name. We cannot tell you how many other parsers still do the same. What we can tell you is that the fix in Word costs nothing: press Enter between your first and last name, or put them on one line. A new paragraph survives every reader we know of. A manual line break is a gamble.

### Sidebar tables are read row by row

Word has a Columns feature. Not one of the 32 templates uses it. Instead, 30 of them are built on a table, and when the table draws a sidebar next to the main content, the reader walks it cell by cell. Here is "Social media marketing resume":

> MIRA KARLSSON SOCIAL MEDIA MARKETING SPECIALIST CONTACT PROFILE 816-555-0146 mira@example.com www.example.com Social Media Marketing Specialist, utilizing my 5+ years of experience...

The two headings come out side by side, then the contact details, then the profile text. A human can untangle that. "Clean elegant resume" is worse:

> 4567 Main Street City, State 98052 (718) 555–0100 taylor@example.com TaylorPhillips ... Design Director Senior Designer Designer First Up Consultants 20XX - Current Nod Publishing 20XX – 20XX Adatum Corporation 20XX – 20XX

The address comes before the name. Then three job titles in a row, then three employers, then three date ranges. No job is next to its company, and no company is next to its dates. A keyword matcher still finds the words. Anything that tries to rebuild your career, which job, where, for how long, has nothing to hold on to.

A table is not a problem in itself. The single-column templates built on one are read top to bottom, in order. The damage comes from two columns of unrelated content sitting in one table row.

### What came through clean

The gallery also does several things right, and they are worth copying.

- **Not one of the 32 templates puts the name or contact details in the page header.** Every one keeps them in the body. In our formatting test, a Word header vanished entirely from the extracted .docx text, so this matters.
- **All 32 kept the email address** in the extracted text.
- **No text boxes, no small caps, no stretched letter-spacing**, the three habits of designer templates that split words into letters in a PDF.
- **The single-column templates extracted in reading order**, name first. "Simple ATS healthcare resume" came out as "Sheetal Parmar Phlebotomist 316.555.0136 | sheetal@example.com PROFESSIONAL Experience Jan 20XX — present | Phlebotomist Lamna Healthcare", which is exactly the page. "ATS stylish accounting resume", "Modern accounting resume", "Industry manager resume" and "Basic management resume" behaved the same way.

Microsoft's gallery has a separate ATS page, described as "well-formatted ATS-friendly resume and cover letter templates in Microsoft Word" (checked 4 October 2026). It lists five resume templates. Three of them extracted cleanly and two glued the name, which is not a better ratio than the gallery as a whole, and the label does not tell you which two.

<div class="blog-dodont">
  <p class="blog-takeaway-head">What the 32 templates taught us <span>about Word habits</span></p>
  <div class="blog-dodont-grid">
    <div class="blog-dodont-col blog-dodont-dont">
      <p class="blog-dodont-tag">Changed the extracted text</p>
      <p class="blog-dodont-item">First and last name separated by Shift+Enter</p>
      <p class="blog-dodont-item">A sidebar and the main content in one table row</p>
      <p class="blog-dodont-item">Job titles in one cell, employers in another, dates in a third</p>
    </div>
    <div class="blog-dodont-col blog-dodont-do">
      <p class="blog-dodont-tag">Came through intact</p>
      <p class="blog-dodont-item">Name on one line, or first and last name as two paragraphs</p>
      <p class="blog-dodont-item">One column read top to bottom, or real Word columns</p>
      <p class="blog-dodont-item">Each job with its company and dates in the same paragraph block</p>
    </div>
  </div>
  <p class="blog-dodont-foot">Contact details in the body of the page, never in Insert > Header. Every Microsoft template already does this.</p>
</div>

## Step 1: pick a template, or start from a blank page

In Word, File > New, then type "resume" in the search box. The same templates are on the web gallery linked above, where each one opens in Word for the web. If you take a template, pick a single-column one and check two things before you type anything: click into the name and press the right arrow key to see whether the first and last name are one paragraph or two lines joined by a line break (a small ↵ symbol appears when you show formatting marks with Ctrl+Shift+8), and look at where the contact details sit.

Some older guides and videos point you to Word's Resume Assistant, the LinkedIn panel. It is gone. Microsoft's support page says: "As announced on August 9, 2022, Resume Assistant has been removed from Word and is no longer supported." What Word offers now is the template gallery and, in Microsoft 365, Copilot for rewriting sections.

Starting from a blank page is faster than it sounds, and it is the only way to be sure what is in the file. The rest of this article is written for a blank page, and every instruction also works for cleaning up a template.

## Step 2: build the page with Word's own tools

Nothing here needs a table.

**Name and contact line.** Type your name as the first paragraph, press Enter, then your title if you use one, then one line with phone, email, city and LinkedIn URL separated by " | " or " · ". Do not use Insert > Header for this. A header repeats on every page, which is why it tempts people, and in our test the .docx reader did not return it at all. The first lines of the body are read by everything.

**Section titles.** Select the title, then Home > Styles > Heading 1 (or Heading 2 for sub-sections). Styles give you one place to change the look of every heading, and they tag the text as a heading in the file. Plain capitals are fine. Avoid two settings in the Font dialog, Advanced tab: character Spacing set to Expanded, and Small caps. Neither changed the .docx text in our tests, but once the file becomes a PDF, expanded spacing splits words into letters, as our [formatting test](/blog/resume-formatting) shows. Small caps did the same in our PDF reader until we fixed it on 5 October 2026, and can still in other readers.

**Dates on the right.** This is where most people insert a two-cell table. Use a tab stop instead: show the ruler (View > Ruler), click the tab selector at the left end until it shows a right tab, then click near the right margin. Type the job title, press Tab, type the dates. They line up on the right margin and stay in the same paragraph as the title. Or put the dates on the next line. Both keep each job next to its dates in the extracted text.

**Bullets.** Home > Bullets, two to four per job. Our own scorer takes 10 points off its formatting check when no experience has a single bullet, because achievements as bullets parse more reliably than prose.

**Two columns, if you want them.** Layout > Columns > Two. These are real columns, and in our tests the text came out in reading order: the Word-column version of our test resume in the formatting article, and the one French gallery template built on columns rather than a table. One column is still the layout that never fails, so use two only if the content needs it.

**Margins and fonts.** Layout > Margins > Normal (1 inch) or Moderate (0.75 inch). Body text in Calibri, Aptos, Arial or Georgia at 10.5 to 12 point, name at 18 to 24. None of these change what a parser reads. They are for the recruiter's eyes, and the full set of numbers, with what each one does, is in the [formatting spec](/blog/resume-formatting).

## Step 3: fill the sections

The order is the same as every guide: contact, a two or three sentence summary, experience in reverse chronological order, skills, education, then anything optional. The content matters more than the layout and has its own articles here: [how to write an effective resume](/blog/how-to-write-an-effective-resume) for the whole, [resume summary examples](/blog/resume-summary) for the opening lines, and [resume keywords](/blog/resume-keywords) for matching the posting's words, which is what the software compares.

One Word-specific habit: delete every placeholder paragraph you do not use, including the empty ones. An empty "Awards" heading with nothing under it is still a heading in the file.

## Step 4: run Document Inspector before you send

A .docx is a zip of XML files, and one of them is about you rather than your resume. Microsoft's support page lists what a document can carry: "Document properties and personal information", including "author, subject, and title" and "the name of the person who most recently saved a document and the date when a document was created", plus "Comments, revision marks from tracked changes, versions, and ink annotations" and "Text that is formatted as hidden."

We saw it in the templates themselves. 7 of the 25 French Microsoft templates we downloaded still carry a last-modified-by name in their file properties. None of the 32 English ones do. If Microsoft ships that, so will your file: the author is whatever name your Windows or Microsoft account uses, which is sometimes a relative's, a former employer's, or "Administrator". If a friend edited your resume with Track Changes, their name and their edits are in there too.

The fix is built in. Microsoft's instruction: "On the File tab, select Info, choose Check for Issues and select Inspect Document." Tick everything, Inspect, then Remove All next to "Document Properties and Personal Information" and next to comments and revisions. Microsoft adds one warning worth repeating: run it on a copy, "because it is not always possible to restore the data that the Document Inspector removes."

## Step 5: save as .docx, as PDF, or both

The guides disagree, and so does Microsoft. Its Word blog, updated 27 July 2026, says: "Save a resume in Word (.docx) format first, as this format is widely supported by applicant tracking systems (ATS) and commonly used in professional workplaces." Most resume sites say PDF. Our position: send what the posting asks for. When it says nothing, both work as long as the file is made of text, which a Word file always is. The practical differences are two. A .docx opened on a machine without your font reflows, so a one-page resume can turn into a page and three lines. A PDF cannot reflow, but it can be a picture, if it was scanned or exported as an image, and then it contains no text at all.

Two things not to do. Do not save as .doc, the format from 1997 that one guide in our reading still recommends. Our import does not read it, and nothing modern needs it. And do not send the file with its default name: File > Save As, then "firstname-lastname-resume.docx" or ".pdf".

To make the PDF: File > Save As, choose PDF in the file type list, or File > Export > Create PDF/XPS. Keep the .docx. It is the file you will edit for the next application.

## Check what the software reads

Two checks, two minutes.

First, drop the .docx on our resume import, the /import page of the app. It reads PDF and DOCX, up to 8 MB, and before asking for anything it shows the first lines of text exactly as it read them, the name it recognised, whether it found an email and a phone number, and the sections it detected. It only claims a name made of two to four capitalised words, so a glued name shows up as one word in the excerpt and no name at all underneath. That is what a Shift+Enter looks like from the other side.

Second, export the PDF and scan it with [our free ATS checker](/ats-checker) against a real posting. The checker reads PDFs, so this is the version of your resume the employer's software will see if you send a PDF. It tells you whether the text could be read, flags a column layout, and lists the posting's keywords your resume is missing. The full picture of what an ATS does with your file is in [our guide to ATS filters](/blog/ats-resume-filters).

<div class="blog-takeaway">
  <p class="blog-takeaway-head">Key takeaways <span>before you save the file</span></p>
  <div class="blog-takeaway-list">
    <div class="blog-takeaway-item">
      <span class="blog-takeaway-num">01</span>
      <p class="blog-takeaway-text">Put your name on one line, or press Enter between first and last name. Never Shift+Enter.</p>
    </div>
    <div class="blog-takeaway-item">
      <span class="blog-takeaway-num">02</span>
      <p class="blog-takeaway-text">Build the page with styles, bullets and a right tab stop for dates. If you take a template, take a single-column one.</p>
    </div>
    <div class="blog-takeaway-item">
      <span class="blog-takeaway-num">03</span>
      <p class="blog-takeaway-text">Run File > Info > Inspect Document on a copy, then save as .docx and PDF with your name in the file name.</p>
    </div>
  </div>
  <p class="blog-takeaway-next">Then see what a parser reads in your file: <a href="/ats-checker">scan the PDF against a real posting</a>.</p>
</div>

## Read next

- [Nursing skills for your resume: 30 to list, and how 60 hospital postings word them](https://hiredfolio.com/blog/nursing-skills)
- [Customer service skills for your resume: what 44 support job ads ask for](https://hiredfolio.com/blog/customer-service-skills)
- [Resume objective: 30 examples by job and how to write one (2026)](https://hiredfolio.com/blog/resume-objective)
